How do I take down a Harbor Breeze ceiling fan? Replace it as usual, and then get the globe back on by following the same instructions as above, just in reverse. Once the globe is off, the light bulb will be exposed. If there are no screws on the globe, you probably just need to gently turn it to one side to unscrew it. Be careful not to drop the globe as it is highly breakable. Gently hold the fan globe in one hand while you work with a screwdriver to get it off the fan. The first step in the process is turning the fan and the light off so that you can work safely. How do I change the light bulb in a Harbor Breeze ceiling fan? Some models might also have the model number listed on the instruction manual that comes with the fan.

The number should also be on your receipt and the fan box. One is on the fan motor, and you cannot see it unless you look over the blades when the fan is off. Where is the model number on a harbor breeze ceiling fan?Īs with most fans, you can find the model number in two to three spots. For more info, also check out this guide How to install Harbor Breeze Fans. They will know what to do immediately, and the process will go much smoother. Of course, you can always ask an electrician to help you with all of this. The only thing left is to secure the fan blades. Attach the downrod to the motor following the manual, and make the appropriate wire connections. You will need the motor screws from one of the earlier steps here. You should then insert the downrod into the collar yoke and rotate it until all elements click together. Then, thread the main (blue, black, white) wires through the canopy and the downrod. Now, it is time to install a downrod (a pipe that will connect the motor to the fan itself) on the mount so that the ball-like end is pointed towards the ceiling. Pull all wires through the central hole of the bracket, as you will need them later on. If the Harbor Breeze fan comes with a J-hook, install the bracket so that the hook faces the floor. You should use lock washers and mounting screws. Finally, secure the mounting bracket to the electrical box. Then, you remove the mounting bracket from the canopy. You will use them later on in the process. You should start by removing the Harbor Breeze motor screws. The next step is to install the mounting bracket for your fan. Your fan needs to be at least 7 feet above the floor and have no obstructions at least 24 inches from the blade tips. Also, keep the light switch in the OFF position. If you need to do some additional wiring to get the fan up, calling a professional might be best.Īlways remember to turn off your electricity at the main fuse/circuit box while you work. Before you begin the installation process, the first and most important step is to read the instruction manual that comes with the fan thoroughly.

Download fanco ceiling fan manual